GEO Home
Home  |   Partners  |   Help us build GEO  |   About Us  |   Contact Us

Login to submit data



Quick Access Tools

Abstract

Swanbank C and D Oil Power Plant Australia is located at Queensland. Location coordinates are: Latitude= -27.653999790083, Longitude= 152.8159986543. This infrastructure is of TYPE Oil Power Plant with a design capacity of 63 MWe. and the last in 1999.

Identifiers for Oil

Name
Status of Plant
Plant Efficiency and Impact
Plant Overall Rating State-of-the-artWorth DuplicatingEnvironmentally Responsible
Country Assigned Identification Number
GEO Assigned Identification Number
Select Currency for data in this page

Location

Draw Lines:
Draw Polygons:
pxpx

Description

Design Capacity (MWe)
Firm Capacity (MWe) nbr
Heat Supply Capacity (MWth)
Type of Plant Short Description
Power Plant Used For
Type of Fuel Primary Secondary
Location
Configuration of Boiler/Turbine/Gen
Electric Power Grid Connected To Name/operator PPA(years)
Name of SubStation Connected To
Source of Oil
Source of Water
Water Withdrawal Rate at Full Power (cum/hour)
Cogen Mode: Steam Supplied To (Tonnes/hour) Description
Environmental Issues
Capital Cost of Plant and/or In US Dollars In Year (YYYY)
SOx Control Device Type
If other, specify:
NOx Control Device Type
If other, specify:
Particulates(PM) Control Device Type
If other, specify:

Unit Information

Unit # Capacity (MWe) Date Commissioned (yyyy-mm-dd) Decommission Date (yyyy-mm-dd) Diesel Engine / Boiler Manufacturer Diesel Engine / Boiler Model/Type Turbine Manufacturer Turbine Model/Type Generator Manufacturer Generator Model/Type Chimney Height (m) Unit Efficiency (%)
1
2
Year Emission Control Devices Installed (YYYY) Year Emission Monitoring Devices Installed (YYYY)
NOx SOx Hg CO2 N2O PM NOx SOx Hg CO2 N2O PM
1
2

Environmental Issues

Issue 1 Description

Past and Future Major Upgrades

Upgrade 1 Cost Year -

Owner and Operator Information

Owner 1 % Share
Type of Ownership
Construction/EPC Contractor
Operating Company
Regulatory Authority
Project Financed By

Annual Performance

Comments

Comment 1
Comment 2

References

Reference 1
Reference 2
Reference 3
Reference 4
Reference 5

Notes

* Australian fiscal and data reporting year is from 1 July - 30 June. Date Convention used by GEO: Year 2006 represents 1 July 2006 to 30 June 2007.
* cum = cubic meters; MWe = Megawatts electric; 1 KWhr = 3412.3 Btu = 859.85 kilocalories; 1 Tonne = 2205 pounds, MM=million